Savin 3460DNP Especificações

1373. Combination ChartCombination ChartThis combination chart shows which modes can be used together.✩ means that these modes can be used together.X

User Tools14644. Mode Setting8 Photo Contrast Specifies the contrast level for Photo when the power is switched on or after mode settings are cleared.

User Tools Menu14745 No Orig. Size When you place originals of non standard sizes on the exposure glass, set original detection to “Ignore”. The machi

User Tools148410 Cancel Comb. Specifies whether Combine Originals or Memory Combine mode is cleared after finishing your print job.Note❒ Default: Not

User Tools Menu149415 Deflector Angle You can change the angle of the wing guide depending on the pa-per type you use.Note❒ Default: Auto❒ Available s

User Tools150420 Auto Rotation When the direction in which your original is placed differs from that of the paper, the machine automatically rotates t

User Tools Menu15145. StampNo. Mode Description1 Type You can select the stamp message at power on with the Stamp mode.Note❒ Default: CONFIDENTIAL2 Si

User Tools15248 Type(Page) You can select the page numbering style at power on in Page Stamp mode.Note❒ Default: P1,P29 Direction(Page) You can select

User Tools Menu15346. Administrator Mode❖❖❖❖ User CodesIf user codes are turned on, operators must enter their user codes before they can operate the

User Tools15447. On Line Mode6 Del. User Code You can delete user codes.Note❒ The number of copies made under the deleted code is also deleted.Referen

User Tools Menu15545 IP Address Sets the IP Address.Note❒ Default: 011.022.033.044ReferenceSee the Printer Reference 1 for information about the IP Ad

Combination Chart1383Function specified earlierDirectional Magnifica-tion (%)✩✩✩*1 *1 *1 -- *1 ✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩*1 ✩ *1Directional Magnifica-tion (s

User Tools1564User Tool Menus in Detail1-6 Time SettingAAAAPress the {{{{User Tools}}}} key.BBBBMake sure that “1” is selected,and then press the [OK]

User Tool Menus in Detail1574BBBBEnter 3 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.CCCCEnter 4 with the number keys,and then pre

User Tools1584FFFFSelect the class with the [←←←←] [→→→→]or {{{{~~~~}}}} {{{{}}}}}}}} keys.GGGGEnter the number of studentswith the number keys, and t

User Tool Menus in Detail1594FFFFAdjust the erase edge margin.If you selected A3 to A6 or 11" × 17" to 51/2" × 81/2"A Adjust the e

User Tools1604EEEEChange the number of drum rota-tions while one sheet of paper isfed with the [←←←←] [→→→→] or {{{{~~~~}}}} {{{{}}}}}}}}keys.Note❒ Yo

User Tool Menus in Detail1614FFFFSelect the time period (hours) thedrum unit idles for with the [←←←←][→→→→] or {{{{~~~~}}}} {{{{}}}}}}}} keys.GGGGPre

User Tools16245-4 Stamp PositionNote❒ The default position and availablesettings of each stamp are as fol-lows.AAAAPress the {{{{User Tools}}}} key.BB

User Tool Menus in Detail1634CCCCEnter 4 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.DDDDSelect the stamp position youwant with th

User Tools1644BBBBEnter 5 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.CCCCEnter 7 with the number keys,and then press the [OK] or

User Tool Menus in Detail1654AAAAPress the {{{{User Tools}}}} key.BBBBEnter 5 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.CCCCEnte

Combination Chart1393Function specified earlierClass mode✩✩✩✩✩✩✩✩✩✩✩✩✩✩*1 *1 *1 -- ✩✩✩✩✩✩✩✩✩✩✩*1Job Separa-tion✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩-- ✩✩*1 ✩✩✩✩✩✩✩✩Overl

User Tools1664CCCCEnter 11 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.DDDDSelect the background patternwith the {{{{~~~~}}}}, {{{

User Tool Menus in Detail1674DDDDKeep pressing the [→→→→] or {{{{}}}}}}}} keyto display the number of mastersand prints made under your usercode.EEEEP

User Tools16846-5 Chg. User CodeAAAAPress the {{{{User Tools}}}} key.BBBBEnter 6 with the number keys,and then press the [OK] or {{{{qqqq}}}}key.CCCCE

User Tool Menus in Detail1694DDDDKeep pressing the [→→→→] or {{{{}}}}}}}} keyto display your user code.EEEEPress the [OK] key.FFFFPress the [Yes] key.

User Tools1704

1715. TroubleshootingIf Your Machine Does Not Operate as You WantIf a malfunction or a misfeed occurs, the following messages will appear on thepanel

Troubleshooting1725----When a service call message is shown on the panel displayPress the [Exit] key. Then turn the main switch off and back on again.

If You Cannot Make Prints as You Want1735If You Cannot Make Prints as You WantCombine Originals ModeProblem Cause ActionMisfeeds occur frequently. Imp

Troubleshooting1745Loading PaperThe Load Paper indicator (B) lightswhen the paper feed tray runs out ofpaper.Limitation❒ Load paper when the paper fee

x Clearing Misfeeds1755xxxx Clearing MisfeedsR CAUTION:Note❒ After clearing misfeeds, make surethat all the doors, covers, and unitsare closed and the

Combination Chart1403

Troubleshooting1765• When paper edges stick togetheror paper is not fed in, fan the paperas shown.• When printing onto postcards orthick paper, lower

x Clearing Misfeeds1775EEEEIf you cannot remove the misfedpaper, remove it from the paperfeed tray.FFFFSet the drum unit and close thefront door.Note❒

Troubleshooting1785BBBBLower drum unit lock lever (B1).CCCCTake out the drum.Note❒ For taking out the drum unit,see p.132 “Changing the ColorDrum Unit

x Clearing Misfeeds1795FFFFSet the drum unit and close thefront door.Note❒ For setting the drum unit, seep.132 “Changing the ColorDrum Unit”.----To pr

Troubleshooting1805DDDDRemove the master roll (2).EEEEReset the master roll (1).Note❒ The master roll must be posi-tioned as shown in the illustra-tio

x Clearing Misfeeds1815EEEESet the drum unit and close thefront door.Note❒ For setting the drum unit, seep.132 “Changing the ColorDrum Unit”.”xxxx + B

Troubleshooting1825”xxxx + E” Master Misfeeds in the Master Eject SectionAAAAOpen the front door.BBBBGrasp handle (E1) and pull outthe master eject un

x Clearing Misfeeds1835”xxxx + P” Original Misfeeds Occur When Using the Optional Document FeederAAAAOpen the document feeder (ADF)cover.BBBBPull out

Troubleshooting1845• Pasted originals• Originals written in pencil• Thin originals that have low stiff-ness• Originals with index tabs• Transparent or

When the Open Cover/Unit Indicator (M) Lights1855When the Open Cover/Unit Indicator (MMMM) LightsMMake sure that the followingdoors/covers are closed.

1414. User ToolsAccessing the User ToolsThe user tools allow you to customizevarious default settings. This sectionis intended for the machine adminis

Troubleshooting1865When the Add Ink Indicator (jjjj) LightsThe Add Ink indicator (j) lights when it is time to supply ink.R CAUTION:R CAUTION:R CAUTIO

When the Add Ink Indicator (j) Lights1875CCCCRemove the used ink cartridge.DDDDRemove the cap of the new ink cartridge.EEEEInsert the new cartridge in

Troubleshooting1885When the Master End Indicator (CCCC) LightsThe Master End indicator (C) lights when it is time to replace the master roll orwhen yo

When the Master End Indicator (C) Lights1895GGGGPosition the master roll so that the edge reaches the interior of the masterholder.HHHHClose the maste

Troubleshooting1905When the Master Eject Indicator (kkkk) LightsThe Master Eject indicator (k) lightswhen it is time to empty the mastereject unit or

When Other Indicators Are Lit1915When Other Indicators Are LitIndicator Meaning and actionThe key counter (option) is not set. Insert the key counter.

Troubleshooting1925When Prints Are Not Delivered in a Neat StackWhen Printing on Small Size PaperAAAAAdjust the angle of the end plateby turning the s

Poor Printing1935Poor PrintingDirty BackgroundIf the background of prints is dirty, the drum unit might be dirty.R CAUTION:R CAUTION:R CAUTION:Note❒ T

Troubleshooting1945BBBBPull out the drum unit.Note❒ For taking out the drum unit, see p.132 “Changing the Color Drum Unit”.CCCCWhile pressing the drum

Poor Printing1955EEEETurn the drum unit and lock it after cleaning.FFFFInsert the drum unit until it locks into position, and then lower the drumunit

User Tools1424CCCCChange the settings by followingthe instructions on the panel dis-play, and then press the [OK] key.Note❒ To change the value entere

Troubleshooting1965Black Lines/Stained PrintsCheck the platen cover and clean it if dirty. See p.201 “Cleaning the platen cov-er”.Check the exposure g

1976. RemarksDo's and Don'tsR CAUTION:Important❒ Make sure that the mmmm indicator on the PC controller operation panel is off be-fore unplu

Remarks1986• If the printed paper is stored for more than one day, the paper may becomewrinkled. If this paper is used, wrinkles may also appear on th

Where to Put Your Machine1996Where to Put Your MachineEnvironmentYour machine's location should be carefully chosen because environmental con-dit

Remarks2006Power ConnectionR WARNING:R CAUTION:R CAUTION:Make sure the plug is firmly inserted in the outlet.Machine ClearancePlace the machine near t

Maintaining Your Machine2016Maintaining Your MachineTo maintain high print quality, cleanthe following parts and units regular-ly.❖❖❖❖ Cleaning the ma

Remarks2026Cleaning the Optional Document FeederCleaning the SheetAAAALift the document feeder.BBBBClean the sheet with a damp clothand wipe it with a

2037. SpecificationsMain Frame❖❖❖❖ Configuration:Floor standing (with custom table or cabinet).❖❖❖❖ Printing Process:Full automatic one drum system❖❖❖

Specifications2047❖❖❖❖ Printing Area:• A3 drum:• Inch version: More than 290 × 420mm, 11.4" × 16.5"• Metric version: More than 290mm × 410mm

Main Frame2057❖❖❖❖ Master Eject Unit Capacity:• A3 drumMore than 70 masters• A4 drum100 masters❖❖❖❖ Dimensions (W ×××× D ×××× H)❖❖❖❖ Weight:• Machine:

User Tools Menu1434User Tools MenuReferenceFor accessing the user tools, see p.141 “Accessing the User Tools”.1. SystemNo. Mode Description1 Auto Rese

Specifications2067❖❖❖❖ Optional Equipment:• Drum unit: Color DrumsType 80(L) A3, 11" × 17"Type 80(S) A4, 81/2" × 11"• Key Counter•

Document Feeder (Option)2077Document Feeder (Option)❖❖❖❖ Original Type:Sheet❖❖❖❖ Original Weight:52.3g/m2 to 127.9g/m2, 13.9 lb to 34 lb❖❖❖❖ Original

Specifications2087Editing Function Type 85 (Option)PC Controller (Option)Key Counter (Option)

Twin Color Press Roller Printing System TC-II (Option)2097Twin Color Press Roller Printing System TC-II (Option)❖❖❖❖ Configuration:Floor standing (wit

Specifications2107ConsumablesNote❒ Specifications are subject to change without notice.Name Size RemarksMaster: Length: 140m, 520ft/rollWidth: 320mm,

211INDEX{~~~~}{}}}}}{||||}{{{{{}, 616 single-sided originals → 1 single-sided print of 16 images, 1181 single-sided original → 1 single-sided prin

212EEco.Mode ON/OFF, 146Economy mode, 50{Economy Mode}}}} key, 5Edge Erase, 41{Edge Erase}}}} key, 5Energy Saver mode, 22Energy Saving,

213NNetwork, 155Next, 8No. of Q.start, 148, 160No. of Skip Feed, 148, 159No Orig. Size, 147No Orig. Size DF, 146Number keys, 6OOK, 8{O

214special kinds of paper, 44specifications, 203Stamp, 116, 151Stamp Density, 151{Stamp}}}} key, 5Stamp Position, 151, 162standard paper,

215MEMO

User Tools14442. Set Operat'n Mode7 Data Print Use to print out the following data.Note❒ Available settings:• Log Data (Number of prints made, ho

216UE USA C244MEMO

User Tools Menu14543. Initial SettingNo. Mode Description1 Paper Type Specifies the paper type at power on.Note❒ Default: Std. (Standard)2 MSTR Makg.