Savin 2513f Instruções de Operação descarregar pdf (Página 105)

Precautions

Additional information

• When you click [Active Lease] on the [Scope] menu of DHCP manager, a list of

client leases appears. When the reserved IP address is not active, the name of

the reservation is the name entered in the Client Name field of the [Add Re-

served Clients] dialog box. When the reserved IP address becomes active, the

client name changes to the printer name configured by the Network Interface

Board. Only the first 13 letters of the printer name appear here. When you use

the printer with SmartNetMonitor for Client, use the host name of the printer

as the [Client Properties] dialog box.

• When the DHCP server does not assign an IP address, the Network Interface

Board uses 11.22.33.44 as a temporary IP address. You can check the ma-

chine's IP address on the network configuration page.

• Because 11.22.33.44 is a special IP address, you cannot print using this ad-

dress.

• The DHCP relay agent is not supported. When using the DHCP relay agent

via an ISDN line connection, the packets from the printer will be sent through

the ISDN connection, which can lead to very high communication charges.

When Using the NIB Setup Tool

If the Network Interface Board cannot browse using the TCP/IP protocol, make

sure that the TCP/IP environment is correctly configured in your computer.

When Using IPP with SmartNetMonitor for Admin

When using IPP with SmartNetMonitor for Admin, note the following:

• The network printer can only receive one print job from SmartNetMonitor for

Admin at a time. While the network printer is printing a job, another user can-

not access the network printer until it completes the job. In this case, Smart-

NetMonitor for Admin tries to access the network printer until the retry

interval expires.

• If SmartNetMonitor for Admin cannot access the network printer and times

out, SmartNetMonitor for Admin stops sending the print job. In this case, you

should cancel the paused status from the print queue window. SmartNet-

Monitor for Admin will resume access to the network printer. You can delete

the print job from the print queue window, but canceling a print job that has

been printed by the network printer might cause the next print job sent from

another user to be incorrectly printed.

• If a print job that is sent from SmartNetMonitor for Admin is interrupted and

the network printer cancels the job because something went wrong, launch

the print job again.

• Print jobs sent from another computer do not appear in the print queue win-

dow regardless of the protocol.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 111 112

Sem comentários

Savin 2513f Instruções de Operação Página 105