
129
Changing the
Copier’s Settings
User Tools
Description
You can select the photo type (Press Print, Glossy Photo, or 2nd Genera-
tion) in Auto Text/Photo mode that is selected automatically just after the
machine is tured on or when modes are cleared.
Note
❐ Default: Press Print
You can select the photo type (Press Print, Glossy Photo, or 2nd Genera-
tion) in Photo mode that is selected automatically just after the machine is
turned on or when modes are cleared.
Note
❐ Default: Press Print
The machine returns to its initial condition automatically after your job is
finished. The time can be set from 10 to 300 seconds, or off.
1. Select [On] or [Off] with the keys.
2. When you select [On], enter the time with the Number keys. Then
press the [OK] key.
Note
❐ Default: 60 seconds
The maximum copy quantity can be set from 1 to 99.
Note
❐ Default: 99
The beeper (key tone) sounds when you forgot to remove originals after
copying.
Note
❐ Default: On
❐ When the “Panel Tone” is set to Off, the beeper does not sound even
if the “Original Tone” is set to On.
You can adjust the margin width that is selected as a default in Margin
Adjust mode. You can change this setting as follows:
1. Select the margin direction with the keys.
2. Enter the margin width with the the Number keys. Then press the [OK]
key.
• Metric version: left/20mm - right/20mm in 1mm steps
• Inch version: left/0.8" - right/0.8" in 0.1" steps
Note
❐ Default:
• Metric version: left/10mm
• Inch version: left/0.4"
Up to 2 reproduction ratios which you frequently use can be registered.
1. Select [Ratio 1] or [Ratio 2] with the keys.
2. Enter your desired ratio with the Number keys. Then press the [OK]
key.
Note
❐ Default: 100 %
Menu
Photo Type (Auto)
Photo Type (Photo)
Copy Reset
Max. Copy Q’ty
Original Tone
Margin Adjustment
Set User Ratio
Comentários a estes Manuais