Savin SDC306 Instruções de Operação descarregar pdf (Página 198)

179

Projector Unit

Operation

❐ To extend the area that can be copied, use the glass mount film holder and focus

manually.

5. If the projection lamp does not light.

❐ If the projection lamp does not light and a service message appears on the screen,

the lamp might be burned out. In this case, please call you service representative.

6. If you move the mirror unit.

❐ Perform the shading operation once again.

7. If lines appear on the copy.

❐ Perform the shading operation again.

❐ Some possible causes are:

1. A long time has passed since shading.

2. Many copies were made since shading and the mirror unit has moved due to

copier operation.

3. Someone might have leaned on the machine or put something on it.

❐ If copying from negative film, thin black lines might-appear on the lighter part of the

copy, even after shading.

8. Black lines appear on the edge.

❐ These lines are shadows caused by the film holder and cannot be eliminated.

9. If a ring pattern appears on the copy.

❐ The ring pattern is present on the film itself, and the machine is sensitive enough to

pick it up. Try to change the film setting direction. Adjusting the focusing lever so

that the image is slightly out of focus will eliminate most of the pattern.

❐ Also, try the following:

• Open and close the film cover.

• Slide the film in the holder a bit.

• Turn the film around in the holder. (Do not flip it over.)

What to do if Something Goes Wrong

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 215 216

Sem comentários

Savin SDC306 Instruções de Operação Página 198