
12 March 1999 LASER UNIT
SM 6-23 G031/G032
Replacement
and
Adjustment
6.5.4 POLYGONAL MIRROR MOTOR REPLACEMENT
G031
NOTE:
When doing the following steps, take care not to damage the mirror surface
with the tip of the screwdriver.
1. Remove the top cover. (Refer to Exterior Cover Removal, section 6.1.1.)
2. Remove the laser unit top cover [A] (5 screws and 1 grounding plate [B]).
3. Replace the polygonal mirror motor [C] (4 screws and 1 connector).
G031R504.WMF
[B]
[A]
[C]
Comentários a estes Manuais