Savin SLP20 Manual de Serviço Página 80

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 79
IMAGE FUSING
G031/G032 2-36 SM
2.6.9 ENERGY SAVER MODE
When the machine is not used, the energy saver feature reduces power
consumption by switching off the fusing lamp.
Entering Energy Saver Mode
Energy saver mode starts after the machine has been idle for a certain time. This
time is specified by the user. The following choices are available.
Off (energy saver mode never activates)
15 minutes
30 minutes (default)
1 hour
2 hours
3 hours
This feature is adjusted using the Job Control menu at the printer’s operation
panel.
NOTE:
When the machine is in energy saver mode, the CPU turns off the fusing
lamp. Therefore, the time from the print start command to the start of
printing is longer than in normal standby mode.
Leaving Energy Saver Mode
The machine leaves energy saver mode when one of the following happens.
Print command received from the PC
Front cover opened and closed
Paper tray pulled out and replaced
Any operation panel keys pressed
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Vista de página 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 273 274

Comentários a estes Manuais

Sem comentários