Savin SDC306 Instruções de Operação Página 36

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 54
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 35
Installation and Operating Instructions
SDC 306 1316BED036-11B-E Date 06/09
- 36 -
11.5 Basic system diagram 5:
1 collector array, 1 storage cylinder, solid fuel boiler, return line monitor
System 5 has one collector surface, one
storage cylinder, one solid fuel boiler and
one return line monitor. The control unit
controls the solar function (temperature
difference regulation), the solid fuel boiler
(temperature difference regulation,
thermostat) and the return line temperature
increase (temperature difference
regulation). Heat metering is also possible,
e.g. using an impeller flow meter.
FSK = solid fuel boiler
Info Program Manual operation Basic setting
I I I I
Current collector temperature (E1) Maximum temperature of
storage cylinder
Pump A1 off/on Code entry
Minimum collector temperature (E1) Solar circuit Td start A2 off/on Reset/factory setting
Maximum collector temperature (E1) Solar circuit Td stop A3 off/on Select basic configuration
Current storage temp. at bottom (E2) R2 Td start A4 off/on Max. collector temp.
Minimum storage temp. - bottom (E2) R2 Td stop Mode yield metering
Maximum storage cylinder
temperature at bottom (E2)
R3 Td start
Volume flow
Current solid fuel boiler temp. (E3) R3 Td Stop
DFG/WMM
∗∗
Minimum solid fuel boiler temp. (E3) Set time
Glycol type
Maximum solid fuel boiler temp. (E3)
Glycol percentage
Current storage cylinder temperature
at centre (E4)
Min. temperature for boiler
Minimum storage cylinder temperature
at centre (E4)
Maximum temperature for
boiler
Maximum storage cylinder
temperature at centre (E4)
Maximum temperature for
return line
Current return line temperature (E5) Code change
Minimum return line temperature (E5)
Maximum return line temperature (E5)
Flow rate
Daily yield
Total yield
Displayed only if yield metering mode is equivalent to 1 or 2.
∗∗ Displayed only if yield metering mode is equivalent to 2.
Vista de página 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Comentários a estes Manuais

Sem comentários