Savin SDC306 Instruções de Operação descarregar pdf (Página 39)

Installation and Operating Instructions

SDC 306 1316BED036-11B-E Date 06/09

- 39 -

11.8 Basic system diagram 8:

1 collector array, 2 storage cylinders (hot water and buffer), return line temperature

increase

System 8 has one collector surface, two

storage cylinders, one solid fuel boiler and

one return line temperature increase. The

control unit controls the solar function

(temperature difference regulation for 2

storage cylinders, priority logic), and the

return line temperature increase

(temperature difference regulation). Heat

metering is also possible, e.g. using an

impeller flow meter.

Information Program Manual operation Basic setting

I I I I

Current collector temperature (E1) Maximum temperature of

storage cylinder 1

Pump A1 off/on Code entry

Minimum collector temperature (E1) Solar circuit storage 1 Td Start A2 off/on Reset/factory setting

Maximum collector temperature (E1) Solar circuit storage 1 Td Stop A3 off/on Select basic

configuration

Current temperature of storage

cylinder 1 at bottom (E2)

Maximum temperature of

storage cylinder 2

A4 off/on Maximum collector

temperature

Minimum temperature of storage

cylinder 1 at bottom (E2)

Solar circuit storage cylinder 2

Td Start

Priority storage cylinder

Maximum temperature of storage

cylinder 1 at bottom (E2)

Solar circuit storage cylinder 2

Td Stop

Mode yield metering

Current temp. of storage 2 at top (E4) R2 Td start

Volume flow

∗

Min. temp. of storage 2 at top (E4) R2 Td stop

DFG/WMM

∗∗

Max. temp. of storage 2 at top (E4) Set time

Glycol type

∗

Current return line temperature (E5)

Glycol percentage

∗

Minimum return line temperature (E5) Max. temp. for return line

Maximum return line temperature (E5)

Code change

Current temp. storage 2 - bottom (E3)

Min. temp. storage 2 - bottom (E3)

Max. temp. storage 2 - bottom (E3)

Flow rate

∗

Daily yield 1/2

∗

Total yield 1/2

∗

∗ Displayed only if yield metering mode is equivalent to 1 or 2.

∗∗ Displayed only if yield metering mode is equivalent to 2.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Comentários a estes Manuais

Sem comentários

Savin SDC306 Instruções de Operação Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Impressora multifunções Savin SDC306